No, 3M Window Films require professional application; our authorized 3M Window Film Dealers are thoroughly trained and experienced in performing high quality work. In this way, our customers will enjoy the benefits of 3M Window Films and have the comfort of the 3M warranty.

3M window films are designed exclusively for professional installation and sold only through licensed solar control window film dealers. This dedication to our nationwide network of dealers helps ensure the proper installation of your film. 3M’s strong warranty for replacement film and removal and replacement labor is valid only if the initial installation is performed by an industry professional.

We suggest allowing thirty days for the film to fully dry and cure. During this curing process, it is normal to have small water bubbles and/or a hazy appearance. These will disappear as the film dries; depending upon the film type and weather conditions, drying may take as much as 30 (or even 45) days, or as little as a few days. Once dried, 3M Window Films will look great and perform for many years to come.

3M films are professionally applied by skilled, authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass. The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary. Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges.

Simple paybacks will vary depending upon the amount of sunlit glass exposure, the type of film, the type of glass, cost of fuel, cost of application, and other variables. However, we have seen paybacks often range in the 2-5 year period, with some reported to be even less than 6 months. See your 3M authorized 3M Window Film Dealer to analyze the potential energy savings in your commercial property.

Lower heating and cooling operating costs Lower utility demand costs Utility rebates Improved tenant comfort Improved aesthetics, uniform appearance Improved safety and security Extended A/C equipment life Valued alternative to adding more A/C equipment Most often, our commercial customers will purchase 3M Window Films for tenant comfort and justify the purchase through energy cost savings.

3M Low E Films work much in the same way as the sun control films except that they offer an increased performance against cold weather heat loss. The patented construction of these films enables the metal coating to reflect more of the interior room heat back into the room where it is needed. This improves personal comfort by reducing cold spots near windows and can help save on fuel costs, especially in commercial buildings. These low-e films are also protected with our patented abrasion resistant coating for long-term durability and maintained appearance.

3M Sun Control Films are designed to reduce the amount of solar heat transmission through window glass by increasing the solar reflection (not necessarily visible reflection) and solar absorption through the glass. Typical colored or dyed films work primarily through increased absorption. The color absorbs the solar energy at the glass, thus reducing the direct transmission into the room. These films are not as effective as reflective films for reducing heat. Reflective films are films that have been precision coated with metals. These metallized films are designed to increase the solar energy reflection of the glass. 3M reflective films range from moderate to excellent in solar performance (heat gain reduction). All 3M Sun Control Films are made to be transparent and optically clear. The ultraviolet protection is built into the adhesive system to provide longevity to the film as well as provide UV protection for your home and office furnishings. Most 3M Window Films are protected with our abrasion resistant coating that provides long-term durability and maintained appearance.

No, 3M Window Films do not cause seal failure. We’ve been applying 3M Window Films to insulated windows for many years with several millions of square feet of film applied to date. When recommended films are applied to the inside pane of an insulated glass unit, there will be some absorption (except with clear safety films) of the sun’s energy, which will increase the temperature of the glass pane. Some of this heat will transmit to the airspace, slightly raising the airspace temperature. However, even a 20 F degree increase (unusual for most films) will result in a less than 3% change in air pressure, whereas properly made units are designed and tested to withstand 22% changes in air pressure. Risk of seal failure is greatly determined by the quality of workmanship and the quality of the materials that go into building the insulated glass units. The best guard against seal failure is to purchase well-made units from reputable window manufacturers that have solid experience and histories with insulated units.

Glass breaks when stressed. There are five types of stress which may cause glass breakage:

  1. Thermal Stress–from absorption of solar radiation.
  2. Tensile Stress–from the weight of the glass itself.
  3. Mechanical Flexing Stress–from wind.
  4. Impact Stress–from flying objects, hail, baseballs.
  5. Twisting Stress–from building or window frame sagging or settling.

The first type, thermal stress, is the only one which film may affect. The use of window films will increase the thermal stress on sunlit glass. However, there are also other factors which will increase thermal stress such as: partial shading of windows from overhangs, tightly fitting drapes or blinds, signs or decals on windows, heating and cooling vents directed at glass. In addition, different types of glass (annealed versus tempered, clear versus tinted) have different solar absorption rates and will withstand different degrees of thermal stress. The window film manufacturers have recommended film-to-glass tables for use by factory-trained dealer installers. If a consumer is ever in doubt, he/she should request a copy of such guidelines.

The application of 3M Window Films will increase the temperature of your sunlit glass which will increase the stress on the glass edges. The quality of those glass edges and several other factors (external shading, interior shading, glass history, type of film, size/shape of glass, indoor/outdoor temperature) all contribute to the potential risk of glass breakage. 3M’s forty plus years of experience with applying 3M Window Films to different types of glass enables us to make proper film/glass recommendations and minimize the potential for glass breakage. In addition, we support these recommendations with our 60-month glass breakage warranty against thermal shock fracture. Should the glass break within 60-months of application, 3M; will replace the glass (maximum $500.00), and the dealer will replace the film.

3M Window Films are warranted to maintain their solar properties without bubbling, peeling, cracking, or crazing. Many of our films are warranted against discoloration, too. (Those which do not use dyed polyesters). Should the product proved to be defective, 3M and the authorized 3M Dealer will replace the film and provide the reapplication labor free of charge. Seller also warrants against glass failure due to thermal shock fracture or seal failure (maximum value of $500 per window) caused only as a direct result of the application of 3M Window Films provided the film is applied to recommended types of glass and the glass failure is reported to the seller within the specified time (listed below) from the start of the installation. Sixty (60) months coverage against thermal shock fracture Forty (40) months coverage against seal failure if covered by original window manufacturer Any glass failure covered by this warranty must be reviewed by Seller prior to repair, and only covers film and glass replacement. Optional Platinum Warranty – Residential Applications Only The 3M Platinum Warranty matches the terms and conditions of the residential customer’s existing window manufacturer’s warranty for a mere $.35/square foot. The 3M Platinum Select Warranty matches the terms of the Platinum Warranty, but also increases the replacement value of $500 per window to $1500 per window. This allows the customer continuous coverage on new windows and the peace of mind having assurance that a product from 3M is protecting their investment.

3M Window Films are made to last for many years. The exact length of time depends upon the type of film applied, window orientation, type of glass it is applied to and the particular climate in which it is applied. Most applications last well beyond the warranty length.

After thirty (30) days, you may clean 3M™ Films using normal household cleaning solutions, including ammonia based products: e.g., Windex, and a soft, lint-free cloth or towel. You may also use a squeegee to clean the films. Abrasive products which would scratch or damage the film should not be used.

Definitely! No one has more experience with window film than 3M. 3M was issued the very first patent on 3M Window Film in 1966 and today we are the only manufacturer that can produce our own polyesters, adhesives, metals and scratch-resistant coatings. This gives us the quality control and product consistency other manufacturers just can’t match. What’s more, we have a core of carefully screened authorized dealers who are trained by 3M to professionally install your 3M Window Film correctly. And 3M Window Film is backed by a warranty that covers 100% of materials and labor. It’s the most comprehensive warranty you can get. That, along with 3M’s worldwide reputation as the adhesive experts, means you can rest assured knowing 3M Window Film is safe for your windows, and safe for you.

No, 3M Safety & Security Window Films are not hurricane-proof, earthquake-proof, bullet-proof, bomb-proof, nor burglar-proof. Again, they are designed to make the window glass more shatter-resistant. In the event of a windstorm, these films may have significant safety and security value. They can reduce the risk of injury from flying shards of broken glass, and possibly help prevent debris and water penetration through the window depending on the severity of the storm (and the type of glass, framing system, size and velocity of objects, and more). In an earthquake, these films can reduce the risk of serious injury from flying shards of broken glass, and possible prevent glass from falling out of a home or building. Again, much may depend upon the severity of the quake (and the type of glass, framing system, and more, too). Bullets: these films are not designed to stop bullets. 3M Safety & Security Window Films were originally developed to address international concerns and needs for improved safety and security against terrorist acts of bombings. These films can significantly reduce the risk of serious injury from flying shards of glass due to blasts, however, much depends upon the severity of the blast and the proximity of the window glass to the blast (and glass type, framing system, and more too). 3M Safety & Security Window Films are a low profile, high performance measure of security in the battle against ‘smash and grab’ crime. The tough, shatter-resistant qualities of the film can hold the window glass together even if a brick (or similar object) were actually to pass through the glass. The thief must now make a choice; continue to attack this window, try another window, or move on. Time is short, and often they move on. However, if they are determined to gain entry, they will get in. It is generally recommended that the property have proper alarm systems in addition to 3M Safety & Security Window Film. IMPORTANT NOTICE: This product is not approved in the State of Florida for use as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm. In compliance with Florida Statute 553.842, this product may not be advertised, sold, offered, provided, distributed, or marketed in the State of Florida as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm.

3M Safety and Security Window Films are designed to make glass shatter-resistant by holding the glass pieces together when broken. Compared to 3M™ Sun Control Window Films, 3M Safety & Security Window Films are made with thicker polyester and a much thicker, more aggressive adhesive. 3M Ultra Safety & Security Window Films are unique in the industry; they are built using a special micro-layered polyester technology which increases the films’ tear resistance significantly. The impact and tear resistance of Ultra films outperform all other films of similar thickness.

The ultra violet (UV) protection that we use in our proprietary adhesive system is not indefinite, but we design our window films to maintain high UV protection throughout their lifetime. In fact, we tested an actual glass sample from The Dumbarton House, Washington,DC, and the ultra violet transmission still measures <1% after 10 years!

Nothing completely stops fading. 3M Window Films are designed to help reduce the major causes of fading (ultra violet light, visible light, and solar heat), thus prolonging the life of your furnishings, perhaps as much as two to five times. Keep in mind the article(s) to be protected; if they have a typical life of five (5) years then they may last ten (10) years to much longer depending on the performance of the film selected. However, if the typical life is only 2-3 weeks, then the expectation should be expressed in terms of months. As a general rule of thumb, ultra violet (UV) is approximately 40% of the cause, visible light is about 25%, and heat about 25%. The remaining 10% can be attributed to humidity, pollutants, interior lights, dye stability, and more.

In response to the many requests for a statement on the benefits of installed window film products the International Window Film Association has compiled the following information. This list may not include all potential applications and depending on the product recommendations, many products will not provide all of the benefits listed. It is the responsibility of the installing dealer, as well as the informed consumer, to determine which window film product will best suit their need. Working with an International Window Film Association (IWFA) accredited “Solar Control Specialist” assures the consumer that the dealer they are working with has successfully completed testing on important areas of technical and installation expertise. All window films typically offer: Up to 99% Ultraviolet (UV) light reduction resulting in: Significant fade protection for furniture, carpet, draperies, wood, etc. Reduced fabric/textile deterioration Reduced exposure to UV radiation, which has been linked to certain cancers. Increased shatter resistance resulting in: Increased peace of mind Increased safety for family & friends Heavy gauge security films offer significant benefits from: Natural disasters such as violent storms, earthquake, high winds, etc. Vandalism, terrorist bombings, smash & grab, etc. Scratching/graffiti (glass tagging) on exterior windows, restroom mirrors, elevator doors and glass, and similar flat/smooth surfaces Scratch resistant hard coating protects against: Accidental abrasion and product deterioration from normal cleaning Hazy appearance typical with plastic type materials Performs well in all climates Metallized/solar control window film can provide: Significantly reduced solar heat gain resulting in: Increased comfort Reduced air conditioning costs Reduced HVAC equipment wear and tear/maintenance Increased fade resistance Glare reduction Daytime privacy Attractive accent to home and business windows Lower energy demands from utilities resulting in: Lower overall energy costs Decreased demand for new power generating facilities Decreased environmental emissions With “Accredited Solar Control Specialist” installations you can expect: Knowledgeable sales consultants High quality materials and installation Manufacturer warranties covering product failure Glass thermal shock fracture and IG unit seal failure coverage Confidence you are dealing with an industry professional.

The effective life of window film will vary by the type of film, type of glass, window construction, compass orientation of glass, and in which part of the world the building is located. There are documented cases of film lasting 12 to 22 years or more in some instances. This should not, however, be assumed to be the normal expected life. All quality window films for residential and commercial use are warranted by the film manufacturers for a minimum of five years (certain products may have extended coverage). The warranty includes an address to contact the manufacturer directly should any questions arise either before or after the installation of the window film.

Windows with film applied are easily cleaned without damage to their appearance as long as a few common-sense guidelines are followed: 1. Use a soft clean cloth, soft paper towel, or clean synthetic sponge. 2. Use a soft cloth or squeegee for drying the window. 3. Use any normal glass cleaning solution which contains no abrasive materials. The availability of scratch resistant coatings as a standard feature of quality films has virtually eliminated the need for extra special precautions in cleaning.

In most cases if a house plant is already receiving adequate light the use of window film will not harm it. New growth or flowering may be retarded, and, for a few days, a plant may go into a state of shock while it adjusts to the light change. If a particular plant normally wilts by the end of a sunny day, it will actually thrive better with film installed. Although there are some obvious guidelines in determining what, if any, effect window film will have on a plant (for instance, dark green plants need less light than lighter colored ones), there is one sample test which can be done prior to film installation: merely move the plant to an area with less sunlight for a few days. In addition, most nurseries or local agriculture agencies can advise you whether a particular plant needs closer to maximal or minimal light.

Whether window film should be used on low E windows and how much you will benefit depends on three factors: 1. Type of low E surface used on glass. 2. Location of low E surface in the window system. 3. The desired amount of heat gain reduction, heat loss reduction, or other film benefits. There are two basic types of low E surfaces on glass. One of these is a conductive coating put on glass as it is being made. It gives some heat loss reduction, but does little to reduce heat gain into a building. The second type is a more complex system of multiple layers of metals and conductive coatings deposited on glass after it has been made. This type of low E glass gives heat reductions of 30% to 50% in addition to reducing heat loss. Obviously there will be more heat gain reduction using film on the first type. If there is any question about the type you may have, ask your glass company or the window manufacturer to send you the specific information about your glass. The location of the low E surface in your window system is also very important in deciding whether film should be used. If the low E coating is on the room-side surface of the innermost pane of glass, the use of window film may reduce or eliminate the heat loss reduction of the glass itself. This may be more than offset by the heat gain reduction/heat loss reduction properties of the films to be used. Most low E window systems, however, consist of double pane windows where the low E surface faces the air space between the panes. In this case, film can be installed without eliminating the heat loss reduction benefit of the low E glass. The type of window film you choose for low E glass depends entirely on your desired benefit -whether you want to reduce heat gain, control glare, prevent heat loss, reduce fading or enhance the safety of your windows and glass doors. Carefully consider all these benefits before making a final decision.

Heat rejection properties of window films vary from one product to another. Some films can reject as much as 78 percent of total solar energy.

NO. Global window film is designed for application to smooth window glass only. It is not recommended for use on any unsmooth surfaces or polycarbonates.

The film has a powerful adhesive on one side that is kept clean by a protective liner which is removed at time of installation. Professional installers completely clean and prep the glass prior to installation. Using a special mounting solution, squeegee and stainless cutting blades, they prepare, fit and secure the film to the glass.

There are six factors affecting fabric fading: 1. Ultraviolet Light 2. Visible Light 3. Heat and Humidity 4. Chemical Vapors (including ozone) 5. Age of Fabric 6. Dye Fastness Clear single pane glass (1/8″ to 1/4″) will reject 23-28% of the ultraviolet light from the sun. Insulated glass is slightly better, rejecting 36-41%. Window films installed on glass reject 95-99% of solar ultraviolet light. Different types of clear glass and window systems will reject 13-29% of the solar heat. With window films, 80% solar heat rejection can be obtained. No window film can eliminate fading. It can, however, offer maximum protection from fading due to solar ultraviolet light and solar heat.

NuVision Window Films carries the industry’s finest Black Out film which completely blocks all light and obstructs visibility from both sides. For more details about Black Out film, check the Specialty Series section. You’ll also find information about other unique products including our White Out and Matte films.

3M provides limited lifetime warranty coverage for a number of our automotive and residential films. Other products are backed by varying degrees of warranty coverage, depending on the film and application. Ask your professional installer for a copy of the specific warranty for your film selection.

The life of window film depends on factors that include the application of the film, orientation of the window and geographic location. When properly installed, it is not uncommon for window film to remain attractive and effective for as long as 30 years or more.

Once installed 3M window film helps reduce the amount of solar heat energy coming through a pane of glass. This makes it easier to cool a room or the interior of a car, resulting in lower energy consumption. The extent of savings will depend on the type of film selected and the geographic location where the film is used.

Window film is constructed with ultraviolet-stabilized, dyed polyester which blocks up to 99 percent of the ultraviolet energy that is harmful to humans and damaging to fabrics and furnishings. However, ultraviolet energy is only one of the factors that contribute to fading. It is estimated that ultraviolet is responsible for roughly 40 to 60 percent of fading. Solar heat and light energy also contribute to fading, as do humidity, moisture, abuse and the quality of some dyes used in fabrics. Since these factors vary for different types of films and materials, the fade reduction benefit will also vary depending on the type of film selected, the quality of the products being protected and the environment.

Window films provide numerous benefits including solar heat and ultraviolet rejection and they can be easily fitted to most existing glass which makes them less costly than replacing windows with tinted glass. They also help protect occupants from flying shards of broken glass in the event of accidental breakage.

All window film installers use a special soapy solution during installation. It is normal for some of this solution to become trapped between the glass and the film, requiring time to “dry-out”. The curing or dry-out time is necessary for window film adhesive to properly bond to the glass. How long it takes depends on factors such as the film type and climate during and after installation completion. Your professional installer will tell you what to expect.

The amount of time it takes to install window film depends on the site of the application, access to the glass and the experience level of your selected installer. If you are concerned about the time frame, be sure to ask your dealer for an estimate of installation time.

Standard solar control 3M window films can help hold broken glass together in the event of accidental breakage. However, these films do not strengthen the glass enough to provide shatter-proofing, or reduce the chance of glass breakage.

Proper care and cleaning are critical to maintaining the beautiful appearance of window film. All window film products are susceptible to scratching and damage if they are not properly maintained. To help prevent minor scratches that can occur with cleaning, 3M window films come standard with a very tough, scratch-resistant coating. Still, it is important to follow the care and cleaning instructions provided by your dealer to ensure a long service life from your 3M window film product.

A major benefit of window film is that you can remove and replace it whenever you want. Your professional Installer will be happy to discuss this with you.

After the dry-out process is complete your 3M window film will not need any special care. Cleaning window film can be done safely with mild soapy water and a soft cloth or soft paper towel. Do not use any rough or abrasive materials for cleaning the film side of the glass. Always use cloths that are free of contamination or dirt particles.

The 3M window film line up includes product solutions for just about any solar control, safety or security need. Contact your local professional NuVision Window Films for help in selecting the film that best serves your needs.

Pricing varies depending upon the area covered on your vehicle and your local market. Visit our website at www.nvwindowfilm.com/auto to find a 3M Certified Installer in your area for a free quote.

Yes. The film is intended to be permanent, but can be removed without damage to the finish. 3M recommends that you visit a 3M Certified installer to have the film removed properly.

The film can be purchased and installed by one of our 3M Certified Installers. You can locate an installer in your area by calling 1-414-375-2029, or visit the “Where to Buy” section of our website at www.nvwindowfilm.com/auto.

Window film is optical grade polyester sheeting with colored dye and/or metal particles to reduce the transmission of solar heat, light, and ultraviolet rays through a pane of glass, simultaneously reducing glare.

Generally, window film provides specific personal and property protection from the effects of the sun as well as added safety and security in the events that result in broken glass. The concept of window film for use in solar control flat glass application dates back to the early 1960s. The original film design objective was to control the heating and cooling imbalances that result from solar loading. Such early films were found to reflect solar radiation back from a window, preventing the warming of inside surfaces normally hit by direct sunlight while still allowing vision through the glass.

As the window film concept was developed and improved upon, a demand developed for colored sun control films that would complement architectural design. Coloration of film was achieved through various means to produce colors such as bronze, gray, gold, amber, etc. The energy crisis of the early 1970s prompted an interest in another aspect of window film use: the reduction of heat loss to the outside. It was discovered that polyester film tended to absorb and reradiate long wave infrared heat rather than act as a transparent medium. Through experimentation, new film materials and constructions were developed that enhanced this characteristic. These films greatly improved heat retention within a room’s interior.

The efficiency of solar control window films are closely related to local weather conditions, building orientation, window size, and other factors such as exterior shading conditions. However, with escalating energy costs, products such as window film are increasingly valuable as an investment for commercial and residential owners and commercial facility managers.

There are many types and constructions of solar control and safety window films. These films are considered in the building industry to be “retrofit” products; that is, products to be applied to existing buildings as opposed to use in new construction. In their simplest forms, window films are composed of a polyester substrate to which a scratch resistant coating is applied on one side; a mounting adhesive layer and a protective release liner is applied to the other side. When the release liner is removed, that side of the film with the adhesive is applied to the interior surface of the glass.

Paint Protection Film can be professionally installed anywhere you want to protect your vehicle finish from scratches, chips, stains and other damaging elements. Scotchgard™ Paint Protection Film Pro Series protects:

  • Rocker panels from sand and stones kicked up by tires
  • Trunk ledges from golf clubs, luggage and strollers
  • Hoods, bumpers and mirror backs from flying gravel, bug acids and tar
  • Door handle cavities and door edges from rings, keys, belt buckles and purses
  • Full hoods, trunks and roofs from bird droppings and tree sap

3M strongly recommends that Scotchgard film be installed by a 3M Certified Installer. They have the training and experience to make sure you receive an installation that is fit perfectly to your vehicle. In addition, the warranty is valid only if the film is installed by a Certified Installer.

Our comprehensive warranty for Scotchgard Pro Series film is 7 years from the date of purchase, and includes coverage against defects, yellowing, bubbling and cracking. Visit our website at www.nvwindowfilm.com/auto for more details and to see the full warranty disclosure. 3M PPF Pro Series Warranty Card NuVision Window Films an Tinting Milwaukee.

Paint protection film, or “clear bra” as it is sometimes known, is one of the best ways to preserve the showroom quality finish on your vehicle. The tough, durable, virtually invisible urethane film will keep your vehicle looking newer longer, without changing the design features or color, by creating a barrier and protecting vulnerable areas such as front bumpers, hoods, side mirrors, door handle cavities, door edges, rocker panels, and rear fender panels. Preserving the finish of your vehicle with paint protection film (PPF) keeps your vehicle looking newer longer, and can enhance the resale value of your vehicle in the future.

Scotchgard Pro Series construction provides many features, advantages and benefits over other films. In addition, when you buy film from 3M you know you are buying a recognized brand from a trusted company with staying power.

  • Exceptional clarity: Scotchgard Pro Series has low orange peel, making it one of the clearest films in the industry and virtually invisible on the vehicle.
  • Unrivaled stain and scratch resistance: The revolutionary clear coat technology produces exceptional stain and scratch resistance, making it easier to clean and harder to scratch, ensuring that it keeps the vehicle looking newer, longer.
  • Self healing properties: Innovative technology allows minor scratches to disappear by themselves, keeping the film and your vehicle finish looking new.
  • Excellent durability: The new formula for the Scotchgard Pro Series has superior resistance to yellowing and cracking, ensuring that your vehicle finish retains the showroom quality, color and design features.
  • Maintenance Free: Scotchgard Pro Series film does not require any special maintenance to keep it looking great. You can wash and wax your car as you would normally. Visit our website at www.nvwindowfilm.com/auto.com for additional tips for keeping your film looking its best.

Contact our window film installation professionals for a free quote today.

Contact Us

BRANDS WE'VE WORKED WITH